xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1209
113-19 disable pvid auto_assign
Description
The command is used to disable the auto-assignment of PVID. If auto-assign PVID is disabled,
PVID can only be changed by PVID configuration (user changes explicitly). The VLAN
configuration will not automatically change PVID. If auto-assign PVID is enabled, PVID can be
changed by PVID or VLAN configuration. When a user configures a port to VLAN X’s untagged
membership, this port’s PVID will be updated with VLAN X. PVID is updated with the last item of
the VLAN list. When a user removes a port from the untagged membership of the PVID’s VLAN,
the port’s PVID will be assigned with “default VLAN”.
Format
disable pvid auto_assign
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the auto-assign PVID:
To Next Page
Loading...
