D-Link xStack - Page 1246

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1241
name> is used up.
Parameters description:
<pool-name>: Name of the DHCPv6 Server pool.
Event description: The number of allocated ipv6 addresses is equal
to 4096
Log Message: The number of allocated ipv6 addresses of the
DHCPv6 Server pool is equal to 4096.
Parameters description:
Informational
IP Directed
Broadcast
Event description: IP Directed-broadcast rate exceed 50 packets
per second on a certain subnet.
Log Message: IP Directed Broadcast packet rate is
high on subnet.
[(IP: %s)]
Parameters description:
IP: the Broadcast IP destination address.
Informational
Event description: IP Directed-broadcast rate exceed 100 packets
per second
Log Message: IP Directed Broadcast rate is high.
Parameters description:
Informational
RCP
Event description: Firmware upgraded successfully.
Log Message: [Unit <unitID>,] Firmware upgraded by <session>
successfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
unitID: Represent the id of the device in the stacking system.
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Informational
Event description: Firmware upgrade unsuccessfully.
Log Message: [Unit <unitID>,] Firmware upgrade by <session>
unsuccessfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
unitID: Represent the id of the device in the stacking system.
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Warning
Event description: Firmware uploaded successfully.
Log Message: Firmware uploaded by <session> successfully.
(Username: <username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Informational
Event description: Firmware upload unsuccessfully.
Log Message: Firmware upload by <session> unsuccessfully.
(Username: <username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
Warning
Event description: Configuration downloaded successfully.
Log Message: Configuration downloaded by <session>
successfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
Informational