xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1243
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Attack log message uploaded successfully.
Log Message: Attack log message uploaded by <session>
successfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Attack log message upload unsuccessfully.
Log Message: Attack log message upload by <session>
unsuccessfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware upgraded successfully.
Log Message: [Unit <unitID>,] Firmware upgraded by <session>
successfully (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
UnitID: Represent the id of the device in the stacking system.
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware upgrade was unsuccessful.
Log Message: [Unit <unitID>,] Firmware upgrade by <session>
unsuccessful! (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
UnitID: Represent the id of the device in the stacking system.
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware successfully uploaded.
Log Message: Firmware successfully uploaded by <session>
(Username: <username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware upload was unsuccessful.
Log Message: Firmware upload by <session> was unsuccessful!
(Username: <username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
Event description: Configuration successfully downloaded.
Log Message: Configuration successfully downloaded by
(Username: <username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
To Next Page
Loading...
