D-Link xStack - Page 1258

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1253
vr-id: VRRP virtual router ID.
intf-name: Interface name on which virtual router is based.
Event description: A virtual MAC address is added into switch L2
table
Log Message: Added a virtual MAC <vrrp-mac-addr> into L2 table
Parameters description:
vrrp-mac-addr: VRRP virtual MAC address
Notice
Event description: A virtual MAC address is deleted from switch L2
table.
Log Message: Deleted a virtual MAC <vrrp-mac-addr> from L2
table
Parameters description:
vrrp-mac-addr: VRRP virtual MAC address
Notice
Event description: A virtual MAC address is adding into switch L3
table.
Log Message: Added a virtual IP <vrrp-ip-addr> MAC <vrrp-mac-
addr> into L3 table
Parameters description:
vrrp-ip-addr: VRRP virtual IP address
vrrp-mac-addr: VRRP virtual MAC address
Notice
Event description: A virtual MAC address is deleting from switch L3
table.
Log Message: Deleted a virtual IP <vrrp-ip-addr> MAC <vrrp-mac-
addr> from L3 table
Parameters description:
vrrp-ip-addr: VRRP virtual IP address
vrrp-mac-addr: VRRP virtual MAC address
Notice
Event description: Failed when adding a virtual MAC into switch
chip L2 table.
Log Message: Failed to add virtual MAC <vrrp-mac-addr> into chip
L2 table. Errcode <vrrp-errcode>
Parameters description:
vrrp-mac-addr: VRRP virtual MAC address
vrrp-errcode: Errcode of VRRP protocol behavior.
Error
Event description: Failed when deleting a virtual MAC from switch
chip L2 table.
Log Message: Failed to delete virtual MAC <vrrp-mac-addr> from
chip L2 table. Errcode <vrrp-errcode>
Parameters description:
vrrp-mac-addr: VRRP virtual MAC address
vrrp-errcode: Errcode of VRRP protocol behaviour.
Error
Event description: Failed when adding a virtual MAC into switch L3
table. The L3 table is full.
Log Message: Failed to add virtual IP <vrrp-ip-addr> MAC <vrrp-
mac-addr> into L3 table. L3 table is full
Parameters description:
vrrp-ip-addr: VRRP virtual IP address
vrrp-mac-addr: VRRP virtual MAC address
Error
Event description: Failed when adding a virtual MAC into switch L3
table. The port where the MAC is learned from is invalid.
Log Message: Failed to add virtual IP <vrrp-ip-addr> MAC <vrrp-
mac-addr> into L3 table. Port <mac-port> is invalid
Parameters description:
vrrp-ip-addr: VRRP virtual IP address
vrrp-mac-addr: VRRP virtual MAC address
mac-port: port number of VRRP virtual MAC.
Error
Event description: Failed when adding a virtual MAC into switch L3
table. The interface where the MAC is learned from is invalid.
Log Message: Failed to add virtual IP <vrrp-ip-addr> MAC <vrrp-
mac-addr> into L3 table. Interface <mac-intf> is invalid
Error