D-Link xStack - Page 1260

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1255
Log Message: Login failed through Web(SSL) (Username:
<username>, IP: <ipaddr>).
Parameters description:
username: The use name that used to login SSL server.
ipaddr: The IP address of SSL client.
Event description: Web(SSL) session timed out.
Log Message: Web(SSL) session timed out (Username:
<username>, IP: <ipaddr>).
Parameters description:
username: The use name that used to login SSL server.
ipaddr: The IP address of SSL client.
Information
Event description: Logout through Web(SSL).
Log Message: Logout through Web(SSL) (Username: <username>
,
IP: <ipaddr>).
Parameters description:
username: The use name that used to login SSL server.
ipaddr: The IP address of SSL client.
Information
Port Security
Event description: Address full on a port
Log Message: Port security violation
(MAC: < macaddr > on port:: < unitID: portNum >)
Parameters description:
macaddr: The violation MAC address.
unitID: The unit ID.
portNum: The port number.
Warning
Safe Guard
Event description: The host enters the mode of normal.
Log Message: Unit< unitID >, Safeguard Engine enters NORMAL
mode
Parameters description:
unitID: The unit ID.
Informational
Event description: The host enters the mode of exhausted.
Log Message: Unit< unitID >, Safeguard Engine enters
EXHAUSTED mode
Parameters description:
unitID: The unit ID.
Warning
DoS
Event description: The DOS is possibly spoofed.
Log Message: Possible spoofing attack from IP: <ipaddr>, MAC:
<macaddr>, port: <unitID: portNum>
Parameters description:
Ipaddr: The ip address
macaddr: The violation MAC address.
unitID: The unit ID.
portNum: The port number.
Critical
Event Description: The DoS attack is blocked
Log Message: <dos_name> is blocked from (IP: <ipaddr> Port:
<[unit ID:]portNum>)
Parameters Description:
dos_name: The type of DoS attack will be one of the followings
ipaddr: IP address of attacker
portNum: the attacked port.
Informational
AAA
Event description: Successful login.
Log Message: Successful login through <Console | Telnet |
Web(SSL) | SSH>(Username: <username>, IP: <ipaddr |
ipv6address>).
Parameters description:
ipaddr: IP address.
username: user name.
ipv6address: IPv6 address.
Informational
Event description: Login failed.
Log Message: Login failed through <Console | Telnet | Web(SSL)|
Warning