D-Link xStack - Page 1270

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1265
Event description: BPDU attack automatically recover.
Log Message: Port <[unitID:]portNum> recover from BPDU under
protection state automatically
Parameters description:
unitID: The unit ID.
portNum: The port number.
Informational
Event description: BPDU attack manually recover.
Log Message: Port<[unitID:]portNum> recover from BPDU under
protection state manually.
Parameters description:
unitID: The unit ID.
portNum: The port number.
Informational
External
Alarm
Event description: External alarm occurred
Log Message: [Unit <unitID>] External Alarm Channel
<channel_id> : <alarm_message>
Parameters description:
unitID: The unit ID.
channel_id: Represent the channel ID detected the external alarm
alarm_message: Alarm message when alarm occurred, this is
configurable by user.
The default alarm message is defined in “Default Setting” Chapter.
Critical
RIPng
Event description: The RIPng state of interface changed
Log Message: RIPng protocol on interface <intf-name> changed
state to <enabled | disabled>
Parameters description:
intf-name: Interface name.
Informational
LACP
Event Description: Link Aggregation Group link change
Log Message: Link Aggregation Group <GROUP ID> (Interface: <
ifIndex >) <Link status>
Parameters Description:
Group ID: Link Aggregation Group ID
ifIndex: The interface index of the link aggregation group which link
state was link changed.
Link status: link status.
Value list:
1. link up: The first member port of group link up.
2. link down: The last member port of group link down.
Informational
DLMS
Event Description: Input an illegal activation code.
Log Message: Illegal activation code (AC: <string25>).
Parameters Description:
<string25>: Activation Code
Informational
Event Description: License Expired.
Log Message: License expired (license:<license-model>, AC:
<string25>).
Parameters Description:
<license-model>: License Model Name.
<string25>: Activation Code
Critical
Event Description: License successfully installed.
Log Message: License successfully installed (license:<license-
model>, AC: <string25>).
Parameters Description:
<license-model>: License Model Name.
<string25>: Activation Code
Informational
Event Description: The Activation Code is unbound.
Log Message: Unbound Activation Code (AC: <string25>).
Parameters Description:
<string25>: Activation Code
Critical
Event Description: When a license is going to expire, it will be
Informational