xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1272
Blocking state. The trap is not sent if a
newRoot trap is sent for the same
transition. Implementation of this trap is
dot1agCfmFaultAlarm
This trap is initiated when a connectivity
defect is detected.
Binding objects:
(1) dot1agCfmMepHighestPrDefect
A notification is generated when local MEP
enters AIS status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP
exits AIS status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP
enters lock status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when local MEP
exits lock status.
Binding objects:
(1) dot1agCfmMdIndex
(2) dot1agCfmMaIndex
(3) dot1agCfmMepIdentifier
A notification is generated when port
linkup.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
(3) ifOperStatu
A notification is generated when port
linkdown.
Binding objects:
(1) ifIndex,
(2) if AdminStatus
The trap is sent when any parameter value
exceeds the alarm threshold value or
recovers to normal status depending on
the configuration of the trap action.
Binding objects:
(1) swDdmPort
(2) swDdmThresholdType
(3) swDdmThresholdExceedType
(4) swDdmThresholdExceedOrRecover
The trap is sent when any parameter value
exceeds the warning threshold value or
recovers to normal status depending on
the configuration of the trap action.
Binding objects:
1.3.6.1.4.1.171.12.72.4.
0.2