D-Link xStack - Page 220

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
215
DGS-3620-28SC:admin# create bgp community_list standard list1
Command: create bgp community_list standard list1
Success.
DGS-3620-28SC:admin# config bgp community_list standard list1 add community_set
50000:10 permit
Command: config bgp community_list standard list1 add community_set 50000:10
permit
Success.
DGS-3620-28SC:admin# show bgp community_list list1
Command: show bgp community_list list1
Community List Name: list1
--------------------------------
Type : standard
permit : 50000:10
DGS-3620-28SC:admin#
13-44 show bgp route
Description
This command is used to display route entries in the Border Gateway Protocol (BGP) routing table
Format
show bgp route {[regexp <desc 80> | inconsistent_as | cidr_only | filter_list <list_name 16> |
route_map <map_name 16> | community {community_set <community_set 80> | local_as |
no_advertise | no_export | internet} {exact_match} | community_list <list_name 16>
{exact_match} | ipaddress <ipaddr> | network <network_address> {longer_prefixes} |
prefix_list <list_name 16>]}
Parameters
regexp - (Optional) Display routes matching the AS path regular expression.
<desc 80> - A regular expression to match the BGP AS paths, must enclose in the quotes.
Can include blank space. The string can be up to 80 characters long.
inconsistent_as - (Optional) Display the routes if they have of same prefix and different AS path
originate.
cidr_only - (Optional) Display only routes with non-natural network masks.
filter_list - (Optional) Display routes conforming to the filter list.
<list_name 16> - Enter the filter list name here. This name can be up to 16 characters long.
route_map - (Optional) Display routes matching the route map.
<map_name 16> - Enter the route map name here. This name can be up to 16 characters
long.
community - (Optional) Display routes matching the communities.
community_set - (Optional) Specifies the community set here.
<community_set 80> - Enter the community set here. This value can be up to 80 characters
long.
local_as - (Optional) Do not send outside local AS (well-known community).