D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
219
advertised_routes - (Optional) Displays the routes advertised to a BGP neighbor.
received_routes - (Optional) Displays the routes received from this neighbor.
routes - (Optional) Displays routes in the routing table learned from the neighbor.
received_prefix_filter - (Optional) Displays the prefix filter information that is received from a
BGP neighbor.
statistics - (Optional) Displays the statistical information learned.
Restrictions
None. (EI Mode Only Command)
Example
To show the BGP neighbor or routes relative to one neighbor:
DGS-3620-28SC:admin# show bgp neighbor 10.10.10.2
Command: show bgp neighbor 10.10.10.2
BGP neighbor: 10.10.10.2 (Internal Peer)
-----------------------------------------------
Session State : Enabled
Session Activity : Enabled
Remote AS : 1
Remote Router ID : 192.168.252.252
BGP State : Established ( UP for 00:24:25)
Hold Time : 180 Seconds
Keepalive Interval : 60 Seconds
Advertisement Interval : 5 Seconds
AS Origination Interval : 15 seconds
Connect Retry Interval : 120 seconds
EBGP Multihop : 2
Weight : 100
Next Hop Self : Disabled
Remove Private As : Disabled
Allowas In : Enabled (Num: 3)
Address Family IPv4 Unicast
IPv4 Unicast : None
Soft Reconfiguration Inbound : Enabled
Send Community : None
Default Originate : Enabled
Incoming Update Prefix List : prelist1
Incoming Update Filter List : ASlist1
Route Map for outgoing Routes : routemap1
Unsuppress Route Map : us_routmp1
Outbound Route Filter (ORF) type (64) Prefix list:
Send Mode : Enabled
Receive Mode : Disable
Prefix Max Count : 12000
Prefix Warning Threshold : 75
Prefix Warning Only : Disabled
DGS-3620-28SC:admin# show bgp neighbor 172.16.232.178 advertised_routes
Command: show bgp neighbor 172.16.232.178 advertised_routes

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English