D-Link xStack - Page 263

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
258
Restrictions
None. (EI Mode Only Command)
Example
To delete the CFM link trace reply:
DGS-3620-28SC:admin#delete cfm linktrace mepname mep1
Command: delete cfm linktrace mepname mep1
Success.
DGS-3620-28SC:admin#
16-22 config cfm mp_ltr_all
Description
This command is to enable or disable the "all MPs reply LTRs" function. This function is for test
purposes. According to IEEE 802.1ag, a Bridge replies with one LTR to an LTM. This command
can make all MPs on the LTM’s forwarding path reply with LTRs, no matter whether they are on a
Bridge or not.
Format
config cfm mp_ltr_all [enable | disable]
Parameters
enable - Enable this feature.
disable - Disable this feature.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
To enable the all-MPs-reply-to-LTR function:
DGS-3620-28SC:admin#config cfm mp_ltr_all enable
Command: config cfm mp_ltr_all enable
Success.
DGS-3620-28SC:admin#