D-Link xStack - Page 274

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
269
DGS-3620-28SC:admin#clear cfm dm mepname mep1
Command: clear cfm dm mepname mep1
Success.
DGS-3620-28SC:admin#
16-34 clear cfm lm
Description
This command is used to clear the frame loss measurement information.
Format
clear cfm lm {[mepname <string 32> | mepid <int 1-8191> md [<string 22> | md_index <uint
1-4294967295>] ma [<string 22> | ma_index <uint 1-4294967295>]]} {[results | statistics]}
Parameters
mepname - (Optional) Specifies the MEP name.
<string 32> - Enter the MEP name. This name can be up to 32 characters long.
mepid - (Optional) Specifies the MEP ID.
<int 1-8191> - Enter the MEP ID. This value must be between 1 and 8191.
md - (Optional) Specifies the Maintenance Domain name.
<string 22> - Enter the Maintenance Domain name. This name can be up to 22 characters
long.
md_index - (Optional) Specifies the Maintenance Domain index.
<uint 1-4294967295> - Enter the Maintenance Domain index. This value must be between 1
and 4294967295.
ma - (Optional) Specifies the Maintenance Association name.
<string 22> - Enter the Maintenance Association name. This name can be up to 22
characters long.
ma_index - (Optional) Specifies the Maintenance Association index.
<uint 1-4294967295> - Enter the Maintenance Association index.
results - (Optional) Specifies to clear the stored frame loss measurement results. If none of them
is specified, both of them are cleared.
statistics - (Optional) Specifies to clear the stored statistics of ETH-LM frames (LMM, LMR). If
none of them is specified, both of them are cleared.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To clear the frame loss measurement information.
DGS-3620-28SC:admin#clear cfm lm mepname mep1
Command: clear cfm lm mepname mep1
Success.
DGS-3620-28SC:admin#