xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
290
19-13 delete route redistribute dst ospf src
Description
This command is used to delete the route redistribute configuration on the Switch. It specifies to
not redistribute other routing protocols to OSPF.
Format
delete route redistribute dst ospf src [local | static | rip | bgp]
Parameters
src - Specifies the source protocol.
local - To not redistribute local routes.
static - To not redistribute static routes.
rip - To not redistribute RIP routes.
bgp - To not redistribute BGP routes. (EI Mode Only Parameter)
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete route redistribution settings:
DGS-3620-28SC:admin# delete route redistribute dst ospf src static
Command: delete route redistribute dst ospf src static
Success.
19-14 show route redistribute dst bgp
Description
This command is used to display the route redistribution settings on the Switch. It displays the
redistribution with the target protocol BGP.
Format
show route redistribute dst bgp {src [local | static | rip | ospf]}
Parameters
src - (Optional) Specifies the source protocol.
local - Display the redistribution with the source local.
static - Display the redistribution with the source static.
rip - Display the redistribution with the source RIP.
ospf - Display the redistribution with the source OSPF.
If no parameter is specified, the system will display all route redistributions.
To Next Page
Loading...
Need help?
General