D-Link xStack - Page 299

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
294
Example
To assign a static VLAN to be a guest VLAN:
DGS-3620-28SC:admin#create authentication guest_vlan vlan guestVLAN
Command: create authentication guest_vlan vlan guestVLAN
Success.
DGS-3620-28SC:admin#
20-2 delete authentication guest_vlan
Description
This command is used to delete a guest VLAN setting, but not a static VLAN. All ports which are
enabled as guest VLANs will move to the original VLAN after deleting the guest VLAN.
Format
delete authentication guest_vlan [vlan <vlan_name 32> | vlanid <vlanid 1-4094>]
Parameters
vlan - Specifies the guest VLAN by VLAN name.
<vlan_name 32> - Enter the guest VLAN by VLAN name. The VLAN name can be up to 32
characters long.
vlanid - Specifies the guest VLAN by VLAN ID.
<vlanid 1-4094> - Enter the guest VLAN by VLAN ID. The VLAN ID value must be between 1
and 4094.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a guest VLAN setting:
DGS-3620-28SC:admin#delete authentication guest_vlan vlan guestVLAN
Command: delete authentication guest_vlan vlan guestVLAN
Success.
DGS-3620-28SC:admin#
20-3 config authentication guest_vlan
Description
This command is used to assign or remove ports to or from a guest VLAN.