xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
26
Are you sure to proceed with system reset except IP address?(y/n)
To reset the system configuration settings:
DGS-3620-28SC:admin#reset config
Command: reset config
Are you sure to proceed with system reset?(y/n)
Success.
To reset all system parameters, save, and restart the switch:
DGS-3620-28SC:admin#reset system
Command: reset system
Are you sure to proceed with system reset, save and reboot?(y/n)
Loading factory default configuration… Done.
Saving all configuration to NV-RAM… Done.
Please wait, the switch is rebooting…
2-23 login
Description
This command is used to log in to the switch.
Format
login
Parameters
None.
Restrictions
None.
Example
To login to the switch:
DGS-3620-28SC:admin#login
To Next Page
Loading...
