xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
318
DGS-3620-28SC:admin# debug ospf neighbor_state_change state enable
Command: debug ospf neighbor_state_change state enable
Success.
To enable OSPF interface state change debug:
DGS-3620-28SC:admin# debug ospf interface_state_change state enable
Command: debug ospf interface_state_change state enable
Success.
To enable all OSPF LSA debug flags:
DGS-3620-28SC:admin# debug ospf lsa all state enable
Command: debug ospf lsa all state enable
Success.
To enable all OSPF packet debug flags:
DGS-3620-28SC:admin# debug ospf packet all state enable
Command: debug ospf packet all state enable
Success.
To enable OSPF retransmission debug flag:
DGS-3620-28SC:admin# debug ospf retransmission state enable
Command: debug ospf retransmission state enable
Success.
To enable all OSPF SPF debug flags:
DGS-3620-28SC:admin# debug ospf spf all state enable
Command: debug ospf spf all state enable
Success.
To Next Page
Loading...
Need help?
General