xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
337
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Show BGP debug flag:
Command: debug bgp show flag
Current BGP flags setting:
Peer FSM Event Disable
OPEN Packet Receive Disable
OPEN Packet Send Disable
UPDATE Packet Receive Disable
UPDATE Packet Send Disable
KEEPALIVE Packet Receive Disable
KEEPALIVE Packet Send Disable
NOTIFY Packet Receive Disable
NOTIFY Packet Send Disable
REFRESH Packet Receive Disable
REFRESH Packet Send Disable
CAPABILITY Packet Receive Disable
CAPABILITY Packet Send Disable
Filter Info Disable
Route MAP Disable
Access List Disable
Prefix List Disable
ERROR Information Disable
Zebros Debug Info Disable
Other Normal Information. Disable
21-38 debug bgp all flag
Description
This command is used for setting all BGP debugging flags to disable or enable.
Format
debug bgp all flag [enable | disable]
Parameters
To Next Page
Loading...
Need help?
General