xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
341
21-42 debug bgp show global_info
Description
This command is used for displaying global information of current BGP instance.
Format
debug bgp show global_info
Parameters
None.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show global information:
Command: debug bgp show global_info
As Number: 1
Router ID ：10.2.2.2
Cluster ID : 30.1.1.1
Confed ID : 10
Confederation Peers : 65510 65511
Fast External Fallover : Disabled
Graceful Restart : Disabled
Restart Time : 120 Seconds
Stalepath Time : 360 Seconds
Update Delay Time : 120 Seconds
Dampening Ability : Enable
Client to Client Ability : Enable
Cluster peers are:
1.1.1.2 group1
Default Local PREF : 100
Default HoldTime : 180
Default Keepalive : 60
Scan Time : 60
BGP active flag:
BGP active af-flag is:
BGP_AF_CFLAG_NETWORK_SYNC
note: address family is IPv4 Unicast
BGP active Redist-Flags:
To Next Page
Loading...
