D-Link xStack - Page 353

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
348
Format
debug bgp show as_path_access_list
Parameters
None.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show current BGP as_path access_list information:
DGS-3620-28SC:admin# debug bgp show as_path_access_list
Command: debug bgp show as_path_access_list
BGP AS Path Access List 1
deny (_64[6-9][0-9][0-9]_|_65[0-9][0-9][0-9]_)
permit 33
Total entry: 1
DGS-3620-28SC:admin#
21-50 debug bgp show bgp_timer
Description
This command is used for displaying current BGP timer chain information in BGP protocol stack.
Format
debug bgp show bgp_timer
Parameters
None.
Restrictions
Only Administrator-level users can issue this command. (EI Mode Only Command)
Example
Configure BGP to show current BGP timer chain information.