D-Link xStack - Page 366

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
361
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To enable the PIM-SSM debug function:
DGS-3620-28SC:admin# debug pim ssm
Command: debug pim ssm
Success.
DGS-3620-28SC:admin#
Once the PIM-SSM debug enabled, the debug information maybe outputted.
DGS-3620-28SC:admin# PIM_SSM, 6 Dec 2012 15:37:22 IGMP Group Record Type 2 for
group 232.1.1.1 from 192.168.2.14 on n101, ignored.
Output truncated...
21-70 no debug pim ssm
Description
This command is used to disable the PIM-SSM debug function.
Format
no debug pim ssm
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the PIM-SSM debug function: