D-Link xStack - Page 379

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
374
DGS-3620-28SC:admin#enable dhcp_local_relay
Command: enable dhcp_local_relay
Success.
DGS-3620-28SC:admin#
22-4 disable dhcp_local_relay
Description
This command is used to globally disable the DHCP local relay function on the switch.
Format
disable dhcp_local_relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the DHCP local relay function:
DGS-3620-28SC:admin#disable dhcp_local_relay
Command: disable dhcp_local_relay
Success.
DGS-3620-28SC:admin#
22-5 show dhcp_local_relay
Description
This command is used to display the current DHCP local relay configuration on the switch.
Format
show dhcp_local_relay
Parameters
None.