D-Link xStack - Page 385

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
380
Example
To configure a DHCP Option 60 default drop action:
DGS-3620-28SC:admin#config dhcp_relay option_60 default mode drop
Command: config dhcp_relay option_60 default mode drop
Success.
DGS-3620-28SC:admin#
23-6 config dhcp_relay option_60 delete
Description
This command is used to delete a DHCP Option 60 entry. When all is specified, all rules excluding
the default rules are deleted.
Format
config dhcp_relay option_60 delete [string <multiword 255> {relay <ipaddr>} | ipaddress
<ipaddr> | all | default {<ipaddr>}]
Parameters
string - Delete all the entries whose string is equal to the string specified if the IP address is not
specified.
<multiword 255> - The string value can be up to 255 characters long.
relay - (Optional) Delete one entry, whose string and IP address are equal to the string and IP
address specified by the user.
<ipaddr> - Enter the IP address here.
ipaddress - Delete all the entries whose IP address are equal to the specified IP address.
<ipaddr> - Enter the IP address here.
all - Specifies to have all rules, excluding the default rules, deleted.
default - Delete the default relay IP address that is specified by the user.
<ipaddr> - (Optional) Enter the IP address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete a DHCP Option 60 entry:
DGS-3620-28SC:admin# config dhcp_relay option_60 delete string "abc" relay
10.90.90.1
Command: config dhcp_relay option_60 delete string "abc" relay 10.90.90.1
Success.
DGS-3620-28SC:admin#