D-Link xStack - Page 392

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
387
Success.
DGS-3620-28SC:admin#
23-16 enable dhcp_relay
Description
This command is used to enable the DHCP relay function on the switch.
Format
enable dhcp _relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the DHCP relay function:
DGS-3620-28SC:admin#enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3620-28SC:admin#
23-17 disable dhcp_relay
Description
This command is used to disable the DHCP relay function on the switch.
Format
disable dhcp _relay
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.