xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
405
ieee802 -Specify IEEE802 type.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure manual bindings:
DGS-3620-28SC:admin#create dhcp pool manual_binding engineering 10.10.10.1
hardware_address 00-80-C8-02-02-02 type ethernet
Command: create dhcp pool manual_binding engineering 10.10.10.1
hardware_address 00-80-C8-02-02-02 type ethernet
Success.
24-18 delete dhcp pool manual_binding
Description
This command is used to delete DHCP server manual binding.
Format
delete dhcp pool manual_binding <pool_name 12> [<ipaddr> | all]
Parameters
<pool_name 12> - Enter the DHCP pool name.
<ipaddr> - Enter the IP address which will be assigned to a specified client.
all - Specifies to delete all IP addresses.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete DHCP server manual binding:
DGS-3620-28SC:admin#delete dhcp pool manual_binding engineering 10.10.10.1
Command: delete dhcp pool manual_binding engineering 10.10.10.1
Success.
To Next Page
Loading...
