xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
436
DGS-3620-28SC:admin# create dhcpv6 pool pool1
Command : create dhcpv6 pool pool1
success
27-2 delete dhcpv6 pool
Description
This command is used to delete one or all DHCPv6 pools.
Format
delete dhcpv6 pool [<pool_name 12> | all]
Parameters
pool - Specifies the DHCPv6 pool to be removed.
<pool_name 12> - Enter the DHCPv6 pool name to be removed here. This name can be up
to 12 characters long.
all - Specifies that all the DHCPv6 pools will be removed.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the DHCPv6 pool by specifying the pool name pool1:
DGS-3620-28SC:admin# delete dhcpv6 pool pool1
Command: delete dhcpv6 pool pool1
Success.
27-3 show dhcpv6 pool
Description
This command is used to display one or all DHCPv6 pools configuration.
Format
show dhcpv6 pool {<pool_name 12>}
Parameters
pool – Specifies the DHCPv6 pool to be displayed.
To Next Page
Loading...
