xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
443
DGS-3620-28SC:admin# show dhcpv6 manual_binding
Command: show dhcpv6 manual_binding
Pool Name :net100
Entry 1
IPv6 Address: 3000:100:1::ABCD
DUID : 00030006001572200700
Pool Name :net91
Entry 1
IPv6 Address: 3000:91:1::100
DUID : 00030006aabbcc000000
Entry 2
IPv6 Address: 3000:91:1::101
DUID : 00030006aabbcc000001
Total Entries: 3
27-11 show dhcpv6 binding
Description
This command is used to show the DHCPv6 dynamic binding information. Entering the command
without the pool name will display all information regarding DHCPv6 dynamic binding on the switch.
This command only displays the dynamic binding information, not including manual binding
information.
Format
show dhcpv6 binding {
<pool_na
me 12>}
Parameters
<pool_name 12> - (Optional) Enter the DHCPv6 pool name used here. This name can be up to
12 characters long.
Restrictions
None.
Example
To display the DHCPv6 dynamic binding information on the Switch:
To Next Page
Loading...
