D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
462
Success.
DGS-3620-28SC:admin#
To disable static table lookup for DNS relay:
DGS-3620-28SC:admin#disable dnsr static
Command: disable dnsr static
Success.
DGS-3620-28SC:admin#
30-4 show dnsr
Description
This command is used to display the current DNS relay configuration and static entries.
Format
show dnsr {static}
Parameters
static - (Optional) Specify to display the static entries in the DNS relay table. If this parameter is
omitted, the entire DNS relay table will be displayed.
Restrictions
None.
Example
To display the DNS relay status:

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English