xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
479
Format
create erps raps_vlan <vlanid 1-4094>
Parameters
<vlanid 1-4094> - Enter the VLAN which will be the R-APS VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an ERPS RAPS VLAN:
DGS-3620-28SC:admin#create erps raps_vlan 4094
Command: create erps raps_vlan 4094
Success.
34-4 delete erps raps_vlan
Description
This command is used to delete an R-APS VLAN on the switch. When an R-APS VLAN is deleted,
all parameters related to this R-APS VLAN will also be deleted. This command can only be issued
when ERPS is disabled.
Format
delete erps raps_vlan <vlanid 1-4094>
Parameters
<vlanid 1-4094> - Enter the VLAN which will be the R-APS VLAN.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an R-APS VLAN:
DGS-3620-28SC:admin#delete erps raps_vlan 4094
Command: delete erps raps_vlan 4094
Success.
To Next Page
Loading...
