EasyManua.ls Logo

D-Link xStack - Page 490

D-Link xStack
1284 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
485
Format
show erps {raps_vlan <vlanid 1-4094> {sub_ring}}
Parameters
raps_vlan - (Optional) Specifies the R-APS VLAN.
<vlanid 1-4094> - Enter the R-APS VLAN ID used here.
sub_ring - (Optional) Display the sub-ring configuration information.
Restrictions
None.
Example
To display ERPS information:
DGS-3620-28SC:admin#show erps
Command: show erps
Global Status : Enabled
Log Status : Enabled
Trap Status : Disabled
------------------------------------
R-APS VLAN : 4094
ERPS Status : Disabled
Admin West Port : 1:5
Operational West Port : 1:5 (Forwarding)
Admin East Port : 1:7
Operational East Port : 1:7 (Forwarding)
Admin RPL Port : West port
Operational RPL Port : West port
Admin Owner : Enabled
Operational Owner : Enabled
Protected VLANs : 10-20
Ring MEL : 1
Holdoff Time : 100 milliseconds
Guard Time : 1000 milliseconds
WTR Time : 10 minutes
Revertive mode : Enabled
Current Ring State : -
------------------------------------
Total Rings: 1
DGS-3620-28SC:admin#

Table of Contents

Other manuals for D-Link xStack

Related product manuals