D-Link xStack - Page 558

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
553
44-5 delete igmp_snooping multicast_vlan_group_profile
Description
This command is used to delete an existing IGMP snooping multicast group profile on the switch.
Specify a profile name to delete it.
Format
delete igmp_snooping multicast_vlan_group_profile [profile_name <profile_name 1-32> | all]
Parameters
profile_name - Specifies the multicast VLAN group profile name. The maximum length is 32
characters.
<profile_name 1-32> - The profile file can be up to 32 characters long.
all - Specifies to delete all the profiles.
If no parameter is specified, the system will display all multicast VLAN group profiles.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete an IGMP snooping multicast group profile named “Knicks”:
DGS-3620-28SC:admin#delete igmp_snooping multicast_vlan_group_profile
profile_name Knicks
Command: delete igmp_snooping multicast_vlan_group_profile profile_name Knicks
Success.
DGS-3620-28SC:admin#
44-6 show igmp_snooping multicast_vlan_group_profile
Description
This command is used to display an IGMP snooping multicast group profile.
Format
show igmp_snooping multicast_vlan_group_profile {<profile_name 1-32>}
Parameters
<profile_name 1-32> - (Optional) Specify the multicast VLAN profile name. The maximum length
is 32 characters.