D-Link xStack - Page 616

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
611
Example
To configure a static IPv6 IMPB entry so that that IPv6 address fe80::240:5ff:fe00:28 is bound to
the MAC address 00-00-00-00-00-11:
DGS-3620-28SC:admin# config address_binding ip_mac ipv6address
fe80::240:5ff:fe00:28 mac_address 00-00-00-00-00-11
Command: config address_binding ip_mac ipv6address fe80::240:5ff:fe00:28
mac_address 00-00-00-00-00-11
Success.
DGS-3620-28SC:admin#
50-6 delete address_binding blocked
Description
This command is used to delete a blocked entry. It specifies the address database that the system
has automatically learned and blocked.
Format
delete address_binding blocked [all | vlan_name <vlan_name> mac_address <macaddr>]
Parameters
all - Specifies that all the blocked MAC addresses will be used.
vlan_name - Specifies the name of the VLAN that the blocked MAC address belongs to.
<vlan_name> - Enter the VLAN name used here.
mac_address - Specifies the MAC address of the blocked MAC address.
<macaddr> - Enter the MAC address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete the blocked MAC address 00-00-00-00-00-11, which belongs to the VLAN named “v31”:
DGS-3620-28SC:admin# delete address_binding blocked vlan_name v31 mac_address
00-00-00-00-00-11
Command: delete address_binding blocked vlan_name v31 mac_address 00-00-00-00-
00-11
Success.
DGS-3620-28SC:admin#
50-7 delete address_binding ip_mac
Description
This command is used to delete an IMPB entry.