D-Link xStack - Page 628

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
623
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the ND snooping function on the Switch:
DGS-3620-28SC:admin# enable address_binding nd_snoop
Command: enable address_binding nd_snoop
Success.
DGS-3620-28SC:admin#
50-21 disable address_binding nd_snoop
Description
This command is used to disable ND snooping on the Switch.
Format
disable address_binding nd_snoop
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the DHCPv6 snooping function on the Switch:
DGS-3620-28SC:admin# disable address_binding nd_snoop
Command: disable address_binding nd_snoop
Success.
DGS-3620-28SC:admin#
50-22 config address_binding nd_snoop ports
Description
This command is used to specify the maximum number of entries that can be learned with ND
snooping.