D-Link xStack - Page 630

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
625
DGS-3620-28SC:admin# show address_binding nd_snoop
Command: show address_binding nd_snoop
ND Snoop : Enabled
DGS-3620-28SC:admin#
To show the ND snooping maximum entry information for ports 1-5:
DGS-3620-28SC:admin#show address_binding nd_snoop ports 1:1-1:5
Command: show address_binding nd_snoop ports 1:1-1:5
Port Max Entry
---- ---------
1:1 No Limit
1:2 No Limit
1:3 No Limit
1:4 No Limit
1:5 No Limit
DGS-3620-28SC:admin#
50-24 show address_binding nd_snoop binding_entry
Description
This command is used to show the ND snooping binding entries on the Switch.
Format
show address_binding nd_snoop binding_entry {port <port>}
Parameters
port - (Optional) Specifies a port used for this display.
<port> - Enter the port number used for this display here.
Restrictions
None.
Example
To display the ND snooping binding entry: