xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
635
51-6 disable jwac forcible_logout
Description
This command is used to disable JWAC forcible logout.
Format
disable jwac forcible_logout
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable JWAC forcible logout:
DGS-3620-28SC:admin#disable jwac forcible_logout
Command: disable jwac forcible_logout
Success.
51-7 enable jwac udp_filtering
Description
This command is used to enable the JWAC UDP filtering function. When UDP filtering is enabled,
all UDP and ICMP packets except DHCP and DNS packets from unauthenticated hosts will be
dropped.
Format
enable jwac udp_filtering
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
To Next Page
Loading...
