D-Link xStack - Page 655

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
650
Parameters
ports - Specifies the port range to delete hosts on.
all - Specifies to delete all ports.
<portlist> - Enter range of ports to delete.
authenticated - (Optional) Specify the state of host to delete.
authenticating - (Optional) Specify the state of host to delete.
blocked - (Optional) Specify the state of host to delete.
mac_addr - Delete a specified host with this MAC address.
<macaddr> - Enter the MAC address here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete authentication entries:
DGS-3620-28SC:admin#clear jwac auth_state ports all blocked
Command: clear jwac auth_state ports all blocked
Success.
DGS-3620-28SC:admin#
51-28 config jwac authenticate_page
Description
This command is used by administrators to decide which authenticate page to use.
Format
config jwac authenticate_page [japanese | english]
Parameters
japanese - Specifies to change to the Japanese page.
english - Specifies to change to the English page. This is the default page.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To customize the authenticate page:
DGS-3620-28SC:admin#config jwac authenticate_page japanese
Command: config jwac authenticate_page japanese
Success.