D-Link xStack - Page 740

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
735
DGS-3620-28SC:admin# delete md5 key 1
Command: delete md5 key 1
Success.
DGS-3620-28SC:admin#
62-4 show md5
Description
This command is used to display the MD5 key table.
Format
show md5 {key <key_id 1-255>}
Parameters
key - (Optional) Specifies that the MD5 key will be displayed.
<key_id 1-255> - Enter the MD5 key used here. This key must be between 1 and 255.
If no parameter is specified, the system will display the MD5 key table.
Restrictions
None.
Example
To display the MD5 key table:
DGS-3620-28SC:admin#show md5
Command: show md5
MD5 Key Table Configurations
Key-ID Key
------ ----------
1 dlink
Total Entries: 1
DGS-3620-28SC:admin#