xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
770
Example
To add an MLD snooping profile to a multicast VLAN group with the name “v1”:
DGS-3620-28SC:admin#config mld_snooping multicast_vlan_group v1 add
profile_name channel_1
Command: config mld_snooping multicast_vlan_group v1 add profile_name channel_1
Success.
66-8 show mld_snooping multicast_vlan_group
Description
This command allows group profile information for a specific multicast VLAN to be displayed.
Format
show mld_snooping multicast_vlan_group {<vlan_name 32>}
Parameters
<vlan_name 32> - (Optional) Specify the name of the group profile’s multicast VLAN to be
displayed.
If no parameter is specified, the system will display all multicast VLAN groups on the switch.
Restrictions
None.
Example
To display all MLD snooping multicast VLANs’ group profile information:
DGS-3620-28SC:admin#show mld_snooping multicast_vlan_group
Command: show mld_snooping multicast_vlan_group
VLAN Name VLAN ID Multicast Group Profiles
------------------------------- ------- ---------------------------------
test2 20
test1 100
To Next Page
Loading...
Need help?
General