D-Link xStack - Page 793

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
788
DGS-3620-28SC:admin# show nlb fdb
Command: show nlb fdb
MAC Address VLAN ID Egress Ports
----------------- ---------- ----------------------------------
02-bf-01-01-01-01 - 1:1-1:5,1:26,2:26
02-bf-01-01-01-02 - 1:1-1:5,1:26,2:26
03-bf-01-01-01-01 100 1:1-1:5,1:26,2:26
03-bf-01-01-01-01 1 1:1-1:5,1:26,2:26
Total Entries : 4
DGS-3620-28SC:admin#
69-5 create nlb unicast_fdb
Description
This command is used to create the NLB unicast FDB entry.
Format
create nlb unicast_fdb <macaddr>
Parameters
<macaddr> - Enter the MAC address of the NLB unicast FDB entry to be created.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create an NLB unicast MAC forwarding entry, for the product that support the VLAN information
on the unicast forwarding:
DGS-3620-28SC:admin#create nlb unicast_fdb 02-bf-01-01-01-01
Command: create nlb unicast_fdb 02-BF-01-01-01-01
Success.
DGS-3620-28SC:admin#
69-6 config nlb unicast_fdb
Description
This command is used to add or delete the forwarding ports for the specified NLB unicast FDB
entry.