D-Link xStack - Page 806

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
801
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command..
Example
To enable SNMP linkchange trap support:
DGS-3620-28SC:admin#enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
DGS-3620-28SC:admin#
70-16 disable snmp linkchange_traps
Description
This command is used to disable SNMP linkchange trap support.
Format
disable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable SNMP linkchange trap support:
DGS-3620-28SC:admin#disable snmp linkchange_traps
Command: disable snmp linkchange_traps
Success.
DGS-3620-28SC:admin#