D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
828
RCP 0 0 0
Telnet 0 0 0
UDP-Helper 0 0 0
VRRP 0 0 0
DGS-3620-28SC:admin#
To display statistics of all Layer 3 multicast routing control packets:
DGS-3620-28SC:admin#show cpu port l3 multicast
Command: show cpu port l3 multicast
Type PPS Total Drop
------------------- ---------- ----------- -----------
IGMP 0 0 0
MLD 0 0 0
PIM-IPv4 0 0 0
PIM-IPv6 0 0 0
DVMRP 0 0 0
Reserved-IPv4-IPMC 0 0 0
Reserved-IPv6-IPMC 0 0 0
Unknown-IPv4-IPMC 0 0 0
Unknown-IPv6-IPMC 0 0 0
DGS-3620-28SC:admin#
To display statistics of OSPFv2 packets:
DGS-3620-28SC:admin#show cpu port type ospfv2
Command: show cpu port type ospfv2
Type PPS Total Drop
------------------- ---------- ----------- -----------
OSPFv2 0 0 0
Hello - 0 -
DD - 0 -
LSR - 0 -
LSU - 0 -
LSAck - 0 -
DGS-3620-28SC:admin#
71-24 clear cpu port
Description
This command is use to reset all counters for Layer 2 and Layer 3 control packets that are trapped
to the CPU.
Format
clear cpu port

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English