D-Link xStack - Page 860

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
855
73-22 show ospf lsdb
Description
This command is used to display the OSPF Link State Database (LSDB).
Format
show ospf lsdb {area <area_id> | advertise_router <ipaddr> | type [rtrlink | netlink |
summary | assummary | asextlink | nssa_ext | stub]}
Parameters
area - (Optional) Specifies a 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
<area_id> - Enter the area ID used here.
advertise_router - (Optional) Specifies the IP address of the advertising router.
<ipaddr> - Enter the advertising router's IP address here.
type - (Optional) Specifies the type of link displayed.
rtrlink - Specifies the type to be displayed as router link.
netlink - Specifies the type to be displayed as network link.
summary - Specifies the type to be displayed as summary.
assummary - Specifies the type to be displayed as AS summary.
asextlink - Specifies the type to be displayed as AS external link.
nssa_ext - Specifies the type to be displayed as NSSA external information.
stub - Specifies the type to be displayed as STUB link.
Restrictions
None.
Example
To display the link state database of OSPF:
DGS-3620-28SC:admin# show ospf lsdb
Command: show ospf lsdb
Area ID LSDB Advertising Link State Cost Sequence
Type Router ID ID Number
------------- ---------- ------------ ------------ ---- ----------------
0.0.0.0 RTRLink 50.48.75.73 50.48.75.73 * 0x80000002
0.0.0.0 Summary 50.48.75.73 10.0.0.0/8 1 0x80000001
1.0.0.0 RTRLink 50.48.75.73 50.48.75.73 * 0x80000001
1.0.0.0 Summary 50.48.75.73 40.0.0.0/8 1 0x80000001
1.0.0.0 Summary 50.48.75.73 50.0.0.0/8 1 0x80000001
0.0.0.0 ASExtLink 50.48.75.73 1.2.0.0/16 20 0x80000001
Total Entries : 6
DGS-3620-28SC:admin#