D-Link xStack Reference Guide

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
953
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the PTP function globally:
DGS-3620-28SC:admin# enable ptp
Command: enable ptp
Success.
DGS-3620-28SC:admin#
83-2 disable ptp
Description
This command is used to disable the PTP function globally. When the PTP function is disabled, all
switch ports will forward the PTP packets according to the multicast filtering configuration.
Format
disable ptp
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable the PTP function globally:
DGS-3620-28SC:admin# disable ptp
Command: disable ptp
Success.
DGS-3620-28SC:admin#
83-3 config ptp mode
Description
This command is used to configure the PTP device type of the switch. The switch supports three
PTP device types, which the user can set globally.

D-Link xStack Specifications

General

Brand	D-Link
Model	xStack
Category	Switch
Language	English