xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
975
Parameters
ports - (Optional) Specify a range of ports to be displayed.
<portlist> - Enter a range of ports to be displayed.
Note: If no parameter is specified, information for all ports will be displayed.
Restrictions
None.
Example
To display the protocol VLAN information for ports 1 to 2:
DGS-3620-28SC:admin# show port dot1v ports 1:1-1:2
Command: show port dot1v ports 1:1-1:2
Port: 1:1
Protocol Group ID VLAN Name Protocol Priority
------------------- --------------------------------- -----------------
1 default -
Port: 1:2
Protocol Group ID VLAN Name Protocol Priority
------------------- --------------------------------- -----------------
1 default 1
Total Entries : 2