D-Link xStack - Page 992

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
987
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Note: If no parameter is specified, the system will display all ports with 802.1p default
priority.
Restrictions
None.
Example
To display 802.1p default priority for ports 1 to 4:
DGS-3620-28SC:admin#show 802.1p default_priority 1-4
Command: show 802.1p default_priority 1-4
Port Priority Effective Priority
---- ----------- ------------------
1 0 0
2 0 0
3 0 0
4 0 0
DGS-3620-28SC:admin#
85-13 enable hol_prevention
Description
This command is used to enable head of line prevention on the switch.
Format
enable hol_prevention
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable HOL prevention on the switch:
DGS-3620-28SC:admin#enable hol_prevention
Command: enable hol_prevention