AV7000 LINEAR CAMERA REFERENCE MANUAL
4 E-GENIUS
The AV7000 camera imaging system provides fully automated, industrial quality barcode
identification and imaging. The user interface provides an easy-to-use series of configuration
and diagnostics features that enable you to set up your Scanning System.
4.1 GETTING STARTED
The AV7000 reader uses a familiar browser-based user interface (e-Genius), which resides
on each camera. It is the tool you will use to define operating parameters, construct output
messages, and view diagnostics for the system. The e-Genius enables you to configure, fine-
tune, and monitor your scanning system operations.
IMPORTANT: Please clear the PC’s browser cache regularly or
set up the browser to disable caching altogether. This is
especially important after software upgrades to make sure
updates in e-Genius are visible.
4.1.1 Prerequisites
Before setting up your AV7000 or multi-head barcode reader system, you will need the
following:
Internet Explorer 11 (or later)
Firefox 30 (or later)
Chrome 36 (or later)
NOTE: Do not use auto-select/auto-fill in the web browser
to fill in a parameter value.
IMPORTANT: For proper e-Genius operation, make sure
the web browser used is configured to allow pop-ups.
To Next Page
Loading...
Need help?
General
