Datalogic AV7000 - Enabling Diagnostics | Conveyor View

AV7000 LINEAR CAMERA REFERENCE MANUAL
202
4
4.7.14 Enabling Diagnostics | Conveyor View
Two settings must be enabled in order for the Conveyor View to be available.
1. Access Device Settings | Camera_1 | Logging and the logging window will open.
2. Select the checkbox to enable Protocol Index Logging.
3. Click Update to save your changes.
4. Access Global Settings | Communications | Transports and the Transport List
window opens.
5. From the Log Type drop-down select Advanced.
6. Click Update to save your changes.