AV7000 LINEAR CAMERA REFERENCE MANUAL
3. Using the medium box with the barcodes on the top surface, run the box on the left,
center, and right portions of the Field of View. All barcodes should be read.
4. Using the largest box with the barcodes on the top surface, run the box on the left,
center, and right portions of the Field of View. All barcodes should be read.
5. If there is a problem reading any of the barcodes, run the Image Viewer to view the
codes. The barcodes used should reflect a sampling of the various codes to be read by
the system.
ï‚· Variation in contrast
 Variation in barcode’s X dimensions
6. Make sure all the barcodes are read successfully.
5.4.2 Other Camera Checks
Confirm communication with host
ï‚· Serial (if applicable)
ï‚· Ethernet (if applicable)
ï‚· Confirm Protocol Index (if applicable)
Observe the System in Action
Confirm that all cameras are reading the barcode correctly and that the scan point is
communicating to the host.