Datalogic AV7000 - Typical Connection Block Diagrams; Single Head AV7000 with DM3610

AV7000 LINEAR CAMERA REFERENCE MANUAL
50
3
3.3 TYPICAL CONNECTION BLOCK DIAGRAMS
NOTE: In each diagram below a Speed Detector may take the place of
the encoder when a tilt-tray or cross-belt conveyance is used.
NOTE: A CBX510 Connection Box can be used in place of the
CBX100 Connection Boxes shown in the following block diagrams.
3.3.1 Single Head AV7000 with DM3610
Figure 51: Single AV7000 with DM3610
* See section 3.8.1 for AV7000 power supply connections.