Datalogic AV7000 - Wiring from DM3610 CBX510 to AV7000 FOCUS SER

ELECTRICAL INSTALLATION
83
3
3.11.4 Wiring from DM3610 CBX510 to AV7000 FOCUS SER
When using a DM3610 dimensioner for focusing, the DM3610’s CBX box must be wired to
the focus serial (FOCUS SER) port of the master AV7000 using a flying lead to M12 cable
(FOCUS CONTROL 5MT CABLE (M12-FREE WIRES) 93A201203.)
Figure 83: DM3610 CBX510 to AV7000 FOCUS SER