AV7000 LINEAR CAMERA REFERENCE MANUAL
8. Set up the Transports options as shown below.
9. Click Update to save the changes.
5.10.1 WebSentinel PLUS Configuration
Before setting up WebSentinel PLUS for an AV7000 tunnel/array, the system administrator
must provide user access (user names and passwords), and scan points must be defined.
See the WebSentinel PLUS Reference Manual.
10. The Remote Monitor server is usually connected to the Image Net port of the AV7000.
Open a browser and enter the IP address of the Remote Monitor server, typically
10.0.40.50. A login windows appears.
To Next Page
Loading...
Need help?
General
