Datalogic AV7000 Reference Manual

MECHANICAL INSTALLATION
27
2
2.4.8 Illuminator Bracket Pre-Assembly and Mounting
The mounting brackets have been designed specifically to quicken, simplify and facilitate
vision system mounting.
These brackets have universal mounting configurations and reference slots for all standard
mounting angles allowing all of the standard Camera mounting positions to be made without
the use of special tools.
The Illuminator Bracket kit included with the Camera contains:
 2 ST-0325 universal main brackets
 2 ST-0326 universal support brackets
 2 ST-0344 universal rising brackets
 4 M8x8 bolts (for support to main bracket assembly)
 8 M8x12 bolts (for illuminator to main bracket assembly)
 2 M4x8 screws + 2 H5 metal spacers (create illuminator locating pins on support
bracket) (Not used for side mounted barcode readers)
IMPORTANT: Be sure to use the M8x8 (short) bolts when
mounting the support brackets to the main bracket. Longer bolts
will pass through the other side of the main bracket, interfering
with the illuminator body.
M8X8 M8X12
Figure 24: Bolt Profiles
Figure 25: Mounting Support Bracket with short bolts

Datalogic AV7000 Specifications

General

Brand	Datalogic
Model	AV7000
Category	Digital Camera
Language	English